BRETTUNS VILLAGE TRUNK SHOP
We sell
REPLACEMENT VINTAGE SUITCASES HANDLES
REPLACEMENT LUGGAGE HANDLES AND PARTS
TYPEWRITER CASE HANDLES
MUSICAL INSTRUMENT CASE HANDLES
GUITAR AMPLIFIER HANDLES
CAMERA CASE HANDLES
ELECTRONICS CASE HANDLES
BOWLING BAG HANDLES
And
OLD STOCK CASE HANDLES FOR SALE

We also have another section of our website that lists other parts for antique and vintage suitcases, valises, instrument cases, gladstones, and other cases and bags.
The BV EESI Handle! (Brettuns Village Emergency Easy Snap-In) in THREE Colors! It's EESI!


This is a new item for us: The Brettuns Village Emergency Easy Snap In handle, and you're supposed to notice that the first letters form BV EESI and that's supposed to make you think this company can't spell EASY and that's fine.
The BV EESI handle is made from heavy harness leather, and it simply snaps into place. For this to work the rings on your case need to be no further apart than 7.5 inches, OK? Measure, please!.
BV EESI in Medium Brown (peanut butter color), cordovan (dark red-brown) or Black, $12.00 each, USA shipping included.
Snap-Handle - Available in Black or Tan


This style of handle has a nickel-plated snap at each end - just snap it onto the existing rings on your suitcase. Takes exactly 4 seconds too install.
The handle is made from premium vegetable-tanned leather. The tan handles are undyed, so you can stain them to match your case if you'd like, or use it the way it is.
Has leather cords inside, with the leather wrapped around, so it's pretty sturdy. Fits onto any suitcase that has two rings, as shown.
The rings need to be somewhere between 4.5 and 8 inches apart for this handle to fit. Our price includes postage costs for any USA location.
SCH200-Tan or Black, $20.00 each, USA shipping included.
Buckle-End Replacement Suitcase and Briefcase Handles
Available in Tan and Black ONLY, but the tan ones can be dyed (by you)


These nice leather handles just buckle into place. Your suitcase must have handle rings in place and they should be between 5 and 7 inches apart (or pretty close) for this to fit.
The straps are 5/8" wide at the point where they attach to the rings on your case. Made of premium vegetable-tanned leather with nickel-plated buckles.
Very sturdy with good lifting power. Available in tan only, but you can dye them any color you'd like - this leather accepts dye readily. $20 each, includes shipping to any location in the USA.
SCH201-Tan or Black, $20.00 each, USA shipping included.
Don't want to use your credit card online?
No problem - you can call your order in to pay with Visa/MC/Amex: 1-207-782-7863
Or you can print out our order form and mail or fax in your order
Spring Steel Reinforced Handles



These handles have a piece of spring steel that extends through the entire handle, and the steel is hooked at the end to fit through the rings or bars on your case.
Fits cases with rings between 6 and 7 inches apart, actual distance between the hooked part of the steel in the handle is 6 and 3/4".
The strap ends are 11/16" wide at the point where they attach to the rings on your case. Available in black or dark brown.
As you can see the Dark Brown is about a frog's hair away from being Black.
SCH202 Spring Steel Handles - $25 each, includes shipping for our USA customers.
Please choose |

Buckle-In Handles for Cases With Rings
That Run That Way Instead of This Way


If the rings or metal bars
are aligned parallel to the long dimension of your case, and if those rings/bars
are between 5 to 6 inches apart (outside dimensions) - in other words,
if they look like this:
-- --
Then these are the replacement
handles you need. The straps are 5/8" wide at the point where they
attach to the rings on your case.
Available in dark brown or black
Priced at $22 each, with free shipping for customers anywhere
in the USA.
Side Buckle Handles
SCH-203


Stitched Leather Handle with Mounting Rings


In a very nice shade of medium brown, perhaps you'd call it British Tan, SCH-204 is a sturdy, stitched leather handle built around a metal band core.
Has a brass plated steel (gold color) rectangular ring at each end so that you can mount this to the existing brackets on your case. Inside dimension is 1 inch.
No brackets, or are you building a new case? Our LOOP8 rings fit fine, as shown in the photo on the right. You can purchase LOOP8 brackets here. Brackets are
NOT INCLUDED with this handle. The leather part of this handle measures 5-3/4" long. If you include the rectangular rings the overall length is 7-1/2".
Again, the rectangular brass rings are included and already attached to the handle. The brackets that hold the rings are NOT INCLUDED but are shown here so that
you can see what you need to get this attached to your case. Got it? Great! SCH-204 handle with rings; $20 each, USA shipping included.
Handle Mounting Hardware

Lots of suitcase parts available here
Leather Strap Handles
TH-10
Just Plain, or With Attached D-Rings


Our handle style TH-10 is
die cut from a single layer of 6 oz harness leather, medium brown, dark
brown, or black in color.
TH-10 is 1.25" wide thru
the middle part of the handle (the strappy ends are only 11/16" wide) and
it's about 9.5" long overall.
You can purchase just the
polain strip of pre-cut leather, or, for a little more, we'll attach 1"
brass plated steel d-rings to the handle for you using our steel (brass
plated) rivets.
If you plan to buy just
the leather strip, be sure the d-rings or loops on your case are no further
than 7".
TH-10 handle - plain strips
of cut leather for $10 each, or with hardware attached for $12.00 each,
in medium brown, dark brown, or black
Please Select: |

OLD STOCK SUITCASE HANDLES
Original old handles from the 1930s and 1940s, never been used, but they're dusty, a little grimy, and you may find some surface rust on some metal parts.
These handles are ready for use though, and make a nice addition to any case or bag.
Quite a selection available,
some are molded plastic, some are leather, some are both - just scroll
down through the list below:
SCH-01


Heavy duty plastic handles
in dark brown or medium brown. These have holes for the posts on
your case hardware. Hole diameter is 5/32", hole length is 9/16".
Priced at $7 each, free
shipping to any USA location. The photos show dark brown on top and medium brown on the bottom.+.
SCH-01 Brown $7
SCH-01 Dark Brown
$7
SCH-07


Black plastic molded handles have mounting brackets in place so they're easy to attach.
Priced at $7 each, free shipping to any USA location.
SCH-07 $7
SCH-09
Strap Handles, Large or Small



Black strap plastic molded handles have a spring steel strip running through the center to give them strength, and black anodized or nickel plated mounting caps..
These do not come with any screws or nuts/bolts, so you'd better make sure you've got some that will work with these handles (a screw, bolt, or rivet that anchors through the hole at each end).
Large SCH-09: Length = 10" overall, width = 1", thickness = 5/16", distance between holes = 7-5/8"
Small SCH-09: Length = 7.5" overall, width = 3/4", thickness = 1/4", distance between holes = 6"
Small SCH-09 $8 each, USA shipping included Choose black or nickel end caps
Large SCH-09 $10 each, USA shipping included Choose black or nickel end caps
: |

Don't want to use your credit card online?
No problem - you can print out our order form and mail or fax in your order
SCH-10


Black fold-down handle with nickel hardware. Molded high-impact plastic handle with attached mounting brackets.
Comes with washers; just run the screws through the case and the washers, tighten them up, and take the rest of the day off.
Priced at $15 each, shipping included to any USA location.
SCH-10 $15
SCH-12A


Brand new SCH-12A handles made of molded black plastic, with attached nickel-plated steel hardware.
Use screws or rivets to attach these to your case, box, car, garage door, neighbors, etc. Priced at $15 each; free shipping to any USA location.
The black high-impact plastic handle is 6" long overall. The rectangular rings that connect brackets to handle are 7/8" by 3/4", ID.
The nickeled steel foot with two screw holes is 1-3/8" long by 7/8" wide. Requires 4 screws or bolts for mounting (not included).
SCH-12A with Hardware $15
SCH-12B



Molded plastic handle, typical of those used on many briefcases. 6-3/4" long overall by 1" wide.
Charcoal-dark gray color. Priced at $5 each; free shipping to any USA location. In the photo above the one toward the top is right side up. T'other one is bumpkin over teakettle (that's 'upside down' if you ain't a Mainer).
SCH-12B $5
SCH-15


Hard plastic handles, black, light weight but sturdy. No hardware included.
Priced at $4 each, free shipping to any USA location.
SCH-15 $4
Important! Our minimum order size is $5 worth of stuff, so you'll have to purchase more than just this one item to qualify for our free USA shipping program. Thanks!
SCH-16

Hard plastic handles, black, with brass plated steel mounting brackets (shiny gold) This is a very common, sturdy handle. No fastening hardware (like screws or bolts) included - you'll need to use/find your own.
Priced at $10 each, free shipping to any USA location.
SCH-16 $10
Important! Our minimum order size is $5 worth of stuff, so you'll have to purchase more than just this one item to qualify for our free USA shipping program. Thanks!
SCH-21
With Mounting Bracket



Black plastic handle with pins to fit that fit into the brackets, allowing the handle to swing in two directions.
Pins are 5/16" in diameter, 1/2" long. One handle, one bracket in each package. Fasteners (screws or rivets) are NOT included.
Priced at $10 each, shipping included to any USA location.
SCH-27


Molded plastic handles with mounting brackets for riveting, nailing, or screwing to your case.
Nice shape looks like a stitched leather handle.
Black with Nickel-plated steel hardware (silver color)
Priced at $10 each, free shipping to any USA location.
SCH-27 $10
"Wide in the Middle" LEATHER CASE HANDLES!


These fit a lot of old suitcases, artist's boxes, musical instrument cases, and other cases that have 3/4" or 1" wide brackets on them.
TH-18 is 10" long, TH-17 is 9-1/8" long. Both are stitched from three layers of harness leather and are very sturdy. Choose medium brown or black.
Sold individually
TH-17 $14 each
TH-18 $15 each
Please choose: |



We sell pairs of brackets in bright brass or bright nickel over on our End Caps/Brackets page - look for the TH-17 Brackets or just click here.
Handles for Purses, Bags, Carrying Cases, and Long Stuff


Made in response to popular demand (two people), Brettuns Village now offers these Made-in-Maine leather purse/bag handles.
Made with a single layer of USA cowhide, medium brown, folded in half and stitched lengthwise around a nylon core that prevents stretching
and gives a round shape to the leather. Single solid brass rivet at each end to protect the ends of the stitching - this makes a big difference in
how long a handle like this will last. The leather is 1-5/16" wide before it gets folded/stitched, and the finished width is 9/16".
Overall length is 25-3/4", length of the stitched portion (rivet to rivet) is 20". The flat tab at each end is 1-5/16" wide by about 2" long.
You'll need to have a plan for how you intend to attach these to your purse, bag, case, nephew, etc. The intent was for them to be machine
stitched, but you can stitch them on by hand, or use any combination of glue, rivets, screw posts, etc. Get creative.
TH-19 handles $15 each, USA shipping included
A Black Leather Handle with Mounting Brackets Attached SCH-32


A black cowhide leather handle, triple layer, stitched through and through, with 1" footman's loops on each end.
Intended to be attached to your case with screws, nuts/bolts, or rivets.
This is a heavy duty handle -please check the dimensions in the picture below - this thing is a monster.
SCH-32 $25 each, USA shipping included
