BRETTUNS VILLAGE TRUNK SHOP
REPLACEMENT PARTS FOR
LUGGAGE AND VINTAGE PURSES,
SUITCASES, BAGS, VALISES,
GLADSTONES, BRIEF CASES, DOCTOR'S BAGS, ETC.
Luggage Repair Parts
for sale
Looking for suitcase handles? Click Here

Antique brass finish handle brackets, complete set includes mounting screws, washers, and handle pins.
These brackets will accomodate handles up to 3/4" wide.
Mounting screws are spaced 1" on center.
SCHBrkt-02 $10 per set Shipping to any USA location included.
Don't want to use your credit card online?
No problem - you can print out our order form and mail or fax in your order

Black finish brackets come in a set that's got everything you need to attach these to your case.
Mounting screws, washers, and handle pins included.
Mounting screws are spaced 1" on center.
SCHBrkt-04 $10 per set Shipping to any USA location included.

Nickel silver finish brackets come in a set that's got everything you need to attach these to your case.
Mounting screws, washers, and handle pins included.
Mounting screws are spaced 1" on center.
SCHBrkt-05 $10 per set Shipping to any USA location included.

Gunmetal finish handle brackets (dark gray-black), complete set includes mounting screws, washers, and handle pins.
These brackets will accomodate handles up to 3/4" wide. The pins on these push into place, which
means you tap them in with a hammer, gently. Mounting screws are spaced 1" on center.
SCHBrkt-06 $10 per set Shipping to any USA location included.
Here's a photo that shows
you the realtive sizes of Bracket Styles 1-5 and Bracket Style 6
D-Ring Loops


These sets come with what you see - two brackets and two d-rings in each set,
and you can choose brass or nickel plated steel. DImensions are as shown on the photo.
Hole spacing center to center is 15/16".
These are sturdy and rather large - attach them with screws or rivets (not included)
D-Ring Loop Set LOOP8
Shipping to any USA location included.
The Big Boys
When your trunk or bag or case or crate weighs a lot


These giant d-rings sets are reported by the maker to have a breaking strength of 700 pounds, but a working load of 200 pounds.
Each set contains what you see in the pictures (except the quarter)(isn't it weird we have to point that out so that we don't get sued
by someone who really just wanted the quarter?). Overall dimensions of each ring/bracket pair is 1-7/8" by 1-7/16". No mounting
fasteners are included - you need to supply your own. Our Binder Posts/Chicago Screws work well (over on the Nails page), or use your own bolts.
Nickel plated, so they have a shiny silver look to them. LOOP-12 2 rings, 2 brackets per set, $12 flat, USA shipping included.
Snap Hasps or Tuck Locks


These are 1-inch snap hasps (also known as tuck locks) that can be attached to your case with screws, rivets, or nails. Nickel-plated steel.
We sell these in sets of two complete snap hasps per pack (Note: each pack contains two tops, two bottoms)
Tuck Clasps $5.00 per pack 100 packs for $40.00 1,000 packs for $200.00
Shipping to any USA location included.
Original Old Stock 1930s
Scissor Lid Stays for Brief Cases, Small Trunks, Etc.
Brass or Nickel finish


Measures 4 and 5/8 inches loing overall, distance between nail holes is about 4 and 1/4". This stay is offset about 1/4 of an inch, so the hinge part won't rub
against the inside of your trunk or box. Brass plated steel or nickel plated steel - your choice - same price.
These are original old stock stays, made in the 1930s. Built to last. Can't buy 'em anywhere else.
Price includes shipping for USA locations. Stay5 $5 each
Original Old Stock 1930s
Large Scissor Lid Stays for Trunks, Boxes, Etc.


Large, nickel-plated steel lid stays work well on larger suitcases, boxes, and trunks. These lock lightly into position with a small ball bearing - they are not technically 'locked'
into position but hold well. The lid will still come down if pushed, so please don't think these are just the thing to protect the fingers of your future virtuoso when he gets the
notion to slam the lid of his toybox. Distance between nail holes is 6 and 5/8 inches when opened fully. These were made in the 1930s and are original old stock, never used.
Price includes shipping to any USA location. 1930s Large Scissor Stay $5 each
Nickel-Plated Old Stock Hinges
Original old stock hinges from the 1930s, never been used


These hinges work well on brief cases, suitcases, and small trunks, which is how they were being used in the factory where we bought them.
Measuring 3.25 inches long by 1.125 (1 and 1/8) inches wide, and they have a 'bump' on them that serves as a foot for the case when stood on end.
Made in the 1930s, original old stock. These are not reproductions. Available in a limited supply and when they're gone they're gone.
Only nickel available - sold out of brass. Sold by the pair (two complete hinges) for $8.00, which includes postage to any USA location.
Nickel Foot Hinges, $8.00 per pair HNG-03
HASPS
SMALL TRUNK HASPS or DRAWBOLTS


It's hard to find hasps that duplicate the older styles, but these aren't bad. Made from brass or nickel-plated steel, then coated with a protective lacquer finish.
They measure 1 and 1/2 inches wide by 2 and 3/4 inches tall when completely closed. Require 5 nails per haspto mount to your trunk.
These are sold by the pair. Price includes postage for USA customers.
Item code = HASP1 Pair of Nickel Hasps $6.00 Pair of Brass Hasps $6.00
Don't want to use your credit card online? No problem - you can print out our order form and mail or fax in your order
PURSE SNAP LOCKS


Small snap locks have prongs on the back of the lock for easy mounting. The hasp has two 1/16" holes in it - use your own mounting hardware. Dimensions are as shown.
Sold per pair (two tops, two bottoms), with USA postage included in the price.
Purse Lock 1 $8 per pair
Old Stock Oblong Feet
Brass or Nickel
These are original 1930s oblong case feet (also known as bumpers) that we purchased as part of an inventory close-out.
New old stock, so these will be a little grimy but are in good condition for their age. Look right at home on your trunk or case.

These oval shaped feet are original equipment, used on smaller trunks and cases in the early to mid 1900s. We have them in nickel-plated steel or brass-plated steel, sold in sets of 4 for $5 per set.
Each foot measures about 1.5" long by 3/8" wide, mounts with a single nail, and has prongs on the upper side to keep them seated against the trunk or case so they don't spin around.
TFT-02 Brass or Nickel Plated Oblong Feet - $10 per 4
Larger groups are available - to inquire about buying these by the 100 just send an e-mail.
1920s Original Old Stock Suitcase or Trunk Round Feet
with split rivets for easy mounting!


Round feet lift your case or trunk off the floor by about 1/2" and are available in three finishes: nickel, brass, or black.
The nickel feet are largest,
measuring 1-inch in diameter by 9/16" tall. The split rivet post
is 5/32" in diameter and extends beyond the base of the foot by 5/16".
The brass feet are in the
middle, at 7/8" dia. and 7/16" tall. The rivet post is 5/32" in dia.
and extends 5/16" beyond the base of the foot.
The black steel feet are
smallest, at 1/2" diameter by 5/16" tall. The split rivet is 5/32"
dia and extends beyond the base of the foot by 5/8".
All of these can be mounted
by hammering them into place thorugh wood, but they work best when installed
by sticking the rivet through a hole in metal,
then splitting open the
rivet inside the case or trunk to hold it in place. We sell these
in sets of 4 for $10 per set, and this includes postage to any USA location.
Made in the 1920s, original
old stock that have never been used. Old Stock Round Feet TFT-03
$10
per set of 4 in any of the 3 colors
Larger groups are available - to inquire about buying these by the 100 just send an e-mail.
Rubber Feet or Bumpers

These came out of the same old trunk/case factory as the parts shown above - just plain old black rubber feet, 1/2" in diameter, with a nail sticking out of the flat side.
Just nail them in. Small size is good for smaller boxes and cases, maybe doll trunks too. Or nail one to your forehead if you've been drifting off to sleep at work lately;
the bumper will bounce your head back into an upright position at the exact moment your boss walks by your cubicle. Not guaranteed.
Rubber Feet 12 for $10.00, USA shipping included.
Large lots of any of the styles shown above are available. If you need over $2000 worth of any combination of our parts please
click here to learn more about our Wholesale program.
- Return to the Parts Index -